contact_support
Did you find any incorrect product information?
Tell us so we can fix it. Thanks!Login for Price
Login for Price
- Brand: JB IndustriesFitting/Connector Type: Adapter
- JB machines all of the brass fittings at the factory in Aurora, Illinois using the highest level of brass, Many import fittings use lower quality brass with lower copper content and higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.
- Made from forged brass to maximize strength and eliminate cracks|Tubing should be double flared in extreme applications to minimize flare thinning on over-tightening|Long dryseal pipe threads minimize leakage and provide more clearance for tightening flare nuts|Long nuts are recommended when vibration is a factor|Slight deviations will occur when full compliance fittings are not available|Tube fittings are make and brake, have good vibration resistance, economical, easy to assemble and are available in a wide variety|Highest level of brass consisting of 65% copper and 35% zinc which means high-tensile strength while resisting corrosion|4:1 safety factor|Heavy duty acr tube fittings generally conform to SAE, ASA and ARI standards for marine, hydraulic and refrigeration service|Vacuum pressures of 5000 psi can be handled depending on the size, material and conditions
- JB Industries Adapter, Fitting/Connector Type: Adapter, 3/8 x 1/2 in Nominal, Female Flare x Flare, 2000 psi, Brass, Domestic