Auer Steel
Part #900-0113-02
Gas+Carbon Monoxide Alarm
Login for Price
- Brand: KiddeDisplay Type: LEDVoltage Rating: 120 VACDimensions: 6.1 in L x 3.8 in W x 1.8 in HOperating Temperature: 40 to 100 deg FType: Carbon Monoxide/Gas Plug-InSensor Type: ElectrochemicalAudible Alert: 85 dBDetection Range: 10 ftPower Source: 9 VDC BatteryHumidity Rating: 10 to 95 %
- The Kidde 900-0113 (model KN-COEG-3) is a 120 VAC powered, plug-in carbon monoxide, propane and natural gas alarm with battery backup and a digital display. The 900-0113 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. The 900-0113 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 ppm with its peak level memory display and will also display gas if it has detected natural gas or propane. This alarm gives you several mounting options, including direct plug, a 6 ft power cord or table top.
- Protects you and your family from two deadly threats carbon monoxide and explosive gas|Digital display shows carbon monoxide level in ppm and detects gas|No buttons to push! continuous digital readout gives you peace of mind at a glance|Peak level memory displays the highest carbon monoxide concentration measured since the last reset|Test reset button tests the unit for proper operation and resets the alarm|AC plug-in operated, easy to install just plug into an AC wall outlet|Battery backup provides continuous protection in case of a power failure|By pressing the peak level button you can see the peak carbon monoxide level recorded by the alarm since it was last reset or unplugged|The continuous digital display shows you the level of carbon monoxide (if any) the unit is sensing as well as if gas is present|The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane|The alarm shall include an attached plug that can be installed in any outlet following the UL/NPFA/manufacturer recommended guidelines|The unit shall incorporate a digital display that meets the sensitivity requirements of UL 2034|Alarm shall include a test button that will electronically simulate the presence of carbon monoxide or gas and cause the unit to go into alarm|The alarm shall include a piezoelectric horn that is rated at 85 dB at 10 ft
- Kidde Nighthawk Combination Alarm, Carbon Monoxide/Gas Plug-In, 120 VAC, 10 ft Detection, Electrochemical Sensor, 9 VDC Battery Power Source, 85 dB Alert, 10 to 95 % Humidity, LED Display, 40 to 100 deg F Operating, 6.1 in L x 3.8 in W x 1.8 in H Dimensions