Auer Steel | Air & Dirt Separator 3in Flange

Caleffi

Part #546080A

Air & Dirt Separator 3in Flange

: Brand: Caleffi
Nominal Size: 3 in
Series: 546
Flow Rate: 95 gpm
Dimensions: 18-3/8 in L x 34-1/2 in H
Material: Steel
Temperature Rating: 32 to 270 deg F
Working Pressure: 150 psi
Connection Type: ANSI 150 lb Raised Face Flange
Maximum Percentage of Glycol: 50 %
Suitable Media: Water/Glycol Solution
Particle Separation Capacity: 5 um
: Air and dirt separators are used to continuously remove the air and debris contained in the hydronic circuits of heating and cooling systems. The air discharge of these devices is very high. They are capable of automatically removing all of the air present in the system down to the microbubble level. The DISCALDIRT air and dirt separator also removes any solid impurities in the system. The impurities collect at the bottom of the device and can be flushed through the integral drain shut-off valve. The circulation of fully de-aerated and cleaned water enables the equipment to operate under optimum conditions, free from noise, corrosion or mechanical damage.
: Stainless steel float guide pin and linkage|Stainless steel mesh internal element|Epoxy resin coated steel body
: Caleffi DISCALDIRT Air and Dirt Separator, Series: 546, 3 in Nominal, ANSI 150 lb Raised Face Flange, 150 psi Working, 32 to 270 deg F, Suitable Media: Water/Glycol Solution, 95 gpm, 50 % Maximum Percentage of Glycol, 5 um Particle Separation, Steel, 18-3/8 in L x 34-1/2 in H